Safety shoes to wear in the feet, is the direct contact with the ground, so that will inevitably produce dirt needs to be cleaned. The following tips are specially designed for electrical safety shoes, anti-static safety shoes, safety shoes, insulation, in principle, it is also applicable to other footwear:

　　1 new safety shoes before wearing the first time, the use of protective sprays maintenance leather, strengthen or restore its waterproof function.

　　2 Before spraying, remove the laces to ensure that all the hidden parts and the gap (in particular, the hidden parts of the tongue near) can be sprayed.

　　3. Particularly dirty shoes, with a brush and a small amount of warm water, wash away the mud and dirt, it is recommended to use special safety shoes cleaning lotion. After cleaning, spray full protective spray (cleaning the leather pores open, protective sprays pores closed).

　　4 in safety shoes just finished cleaning or when wet spray protective sprays, and the need to fully dry for 24 hours. Meanwhile, regular care and cleaning, to prevent moisture and dirt remain in the leather, which is very important because the leather leaving moisture or stains will lose its permeability.

　　5 Apply the shoe leather care milk (including shoe wax component), rapid heating with a hair dryer to make it penetrate latex leather pores, allowing the leather to restore softness. Please note that when using a hair dryer distance and time (at least 30cm or more, up to 3 seconds).

　　6 shoe wax containing milk ingredients will maintain the surface of leather and fur turned slightly darker, with high quality brush gently brushed, can partially restore its appearance; while light skinned and wax dough, easier to keep the original appearance, and more water repellent and dirt repellent.

　　7 Note: Do not use oil or grease cleaning and maintenance emulsion. Although fat material may soften the leather, but the shoes will lose its hardness, and will plug the pores of the leather, safety shoes lose breathability.